Wildgame N2E User Manual download pdf (Page 8)

Setting Date

Trigger Flextime

Location

1.

Press the center navigation

button after setting the minute to

change the Day.

2.

Press the left or right navigation

button to go up or down in

sequence.

3.

When the DAY is set, repeat

steps 1 and 2 to set the Month

and Year.

POWER

POWER

Ready

Time/Date

Location

Trigger

Flextime

PIR Active

Delay

PIR Mode

Flextime

P1 P2

Interval

24Hr Day Night

30sec 1min 2min 5min

POWER

POWER

Ready

Time/Date

Location

Trigger

Flextime

PIR Active

Delay

PIR Mode

Flextime

P1 P2

Interval

24Hr Day Night

30sec 1min 2min 5min

1.

Press the center navigation button

while Location is selected. The

first character will be blinking.

1.

Press the center navigation

button while Trigger is selected.

The highlighted option will be

blinking.

TRIGGER:

PIR MODE: Takes a photo only when the PIR

sensor is triggered.

FLEXTIME (Time Lapse): Takes constant

photos at set times throughout the day,

depending on your Flextime settings.

2.

Press the left or right navigation

button to move to different

options. Press the center naviga-

tion button to save the setting.

2.

Press the left or right navigation

button to go up or down in

sequence. Press the center

navigation button when the

character shown is what you want

and move to the next character.

3.

Repeat steps 1 and 2 to set the

rest of the characters. Press the

center navigation button to skip

spaces and save the location

name.

POWER

POWER

Ready

Time/Date

Location

Trigger

Flextime

PIR Active

Delay

PIR Mode

Flextime

P1 P2

Interval

24Hr Day Night

30sec 1min 2min 5min

POWER

Ready

Time/Date

Location

Trigger

Flextime

PIR Active

Delay

PIR Mode

Flextime

P1 P2

Interval

24Hr Day Night

30sec 1min 2min 5min

POWER

POWER

POWER

POWER

POWER

1.

Press the center navigation

button while Flextime is

selected. The highlighted option

will be blinking.

2.

Press the left or right navigation

button to move to different

options. Press the center naviga-

tion button to save the setting.

POWER

POWER

POWER

POWER

page 7

page 8

Save the location of the area the camera was

installed. This is for your reference and is

optional. If you do not wish to name your

location skip to the next step.

This setting allows you to choose the mode in

which the camera will be capturing images.

POWER

POWER

The Interval setting is set by the Delay Setting

on the camera with a 1 minute minimum

Flextime delay. See chart on the next page for

Flextime options.

NOTE: Camera needs at least 48 hours in the

field to acclimate to the environment for

Flextime to function properly.

Reminder: Only use “Flextime” and “Both”

modes if you are wanting to use time lapse

technology. These modes can reduce battery

life versus the standard “PIR” mode.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

Comments to this Manuals

No comments